Serving the Santa Rosa area  ·  (707) 285-9164  ·  Open Mon-Sun 7am-7pm
📞 (707) 285-9164 Free Quote

Metal Roofing in Windsor, CA (95492) · Local Professionals

Santa Rosa Metal Roofing · Fast response in Windsor and the Santa Rosa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+177Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Windsor is a town of ranches, vineyards, and newer subdivisions tucked between the Russian River and the Mayacamas foothills, with ZIP 95492 covering everything from the Old Town core along Windsor River Road to the horse properties off Shiloh Road.

Homeowners here call Santa Rosa Metal Roofing because we understand what Windsor roofs face: hot, dry summers, fall Diablo winds that push fire danger right to the town's edge, and winter storms that test every seam. After the Kincade Fire came close in 2019, more Windsor property owners are asking for Class A metal assemblies that can stand up to embers and wind-driven rain. We install, repair, and replace metal roofs across Windsor and the surrounding Santa Rosa area, and we do it with fully insured crews and a Metal Roofing Alliance membership behind us.

Metal Roofing in Windsor (95492)

Windsor's housing stock is a mix of single-story ranch homes on generous lots, newer two-story subdivisions with tight side yards, and rural properties with barns, shops, and outbuildings. That variety changes how a metal roof goes on. On the east side toward the foothills, roofs sit on grade and catch wind off the open fields, so panel attachment and edge metal matter more than on a sheltered lot in Old Town. On the west side, clay soils and winter drainage can shift things under a roof, and we often find flashing gaps at chimneys and skylights after a wet season. We also work on the agricultural and commercial buildings that dot the vineyards and horse properties around town, where corrugated and ribbed panel roofing is the practical choice.

Our team has installed and repaired metal roofs all over Windsor and the Santa Rosa area, from standing seam on a new build near the Town Green to screw replacement on an older barn off Arata Lane. We know which profiles and colors fit the local look, and we know when a repair is the right call versus a full replacement.

Our services in Windsor

How a Job Works in Windsor

Step 1: Call us at (707) 285-9164 or request a free estimate. We schedule an on-site assessment, walk the roof and the attic if needed, and take a close look at fasteners, seams, flashing, and gutters. You get a written scope with options, not a pressure pitch.

Step 2: Once you approve the work, we pull the roofing permit through the local building department and coordinate any HOA or design review that applies. On tight lots in the newer subdivisions, we plan material staging and crew access ahead of time so we are not blocking driveways or piling panels on a neighbor's fence line. For rural properties, we account for gate access and equipment turning room.

Step 3: When the job is done, we magnet-sweep for screws and metal shavings, haul away old material, and walk the roof and gutters with you. We leave your property clean and show you what to watch for between inspections.

Pricing in Windsor depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or skylight work at $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. Larger or steeper roofs, difficult access, and urgent storm work can move the number, so we give you a clear estimate before any work starts. Call (707) 285-9164 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Windsor and nearby areas.

My Windsor ranch home has an older shingle roof. Can you install metal over it, or do I need a tear-off?
It depends on how many layers are already there and what the local building department allows. Code limits how many existing layers you can cover, so we check that first. If a retrofit is allowed, we install a proper underlayment and attachment system over the existing roof. If not, we tear off and start fresh. We will tell you which applies to your address before you commit.
A storm just lifted panels on my roof near Windsor River Road. How fast can you respond?
We prioritize active leaks and wind damage in Windsor and the surrounding area. Call (707) 285-9164 and we will schedule an inspection, often the same day or next. We can secure lifted panels and stop active leaks first, then give you a repair or replacement estimate once we see the full extent of the damage.
What does a typical metal roof replacement cost for a Windsor home?
Most Windsor replacements fall in a range based on square footage and roof complexity. As a starting point, replacement begins around $9 per square foot and standing seam around $10 per square foot. A simple ranch roof will land lower than a two-story with dormers and skylights. We provide a free written estimate so you can see the actual number for your property.
Do I need a permit for a metal roof in Windsor, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We pull the permit and coordinate inspections as part of the job. You can also check the City of Windsor website for general information about local rules, and we will confirm the specifics with the building department before work begins.
My HOA has design rules. Will they approve a metal roof?
Many Windsor HOAs have design review for roof profile and color. We help by providing product specs, color samples, and installation details you can submit to your board. If your HOA requires a specific panel style or a muted color, we can match it. We recommend getting approval before scheduling so there are no surprises.
Are you insured for work on my Windsor property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We are happy to provide proof of insurance before work starts, and we recommend asking any contractor you hire for the same documentation.
What maintenance should I do on a metal roof in Windsor between rainy seasons?
Before the fall winds and winter rains, check fasteners for looseness, look for debris in valleys and gutters, and inspect flashing at chimneys and skylights. After a wind event, look for lifted panel edges. A free inspection can catch small issues before they become leaks, and screw replacement now is cheaper than water damage later.
Why choose us?

Trusted professionals in Santa Rosa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Rosa

All your work handled by qualified professionals in Santa Rosa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

177+ Verified Client Reviews in Santa Rosa

⭐⭐⭐⭐⭐ 4.9/5 · 177 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Rosa · Response within 24h · No commitment · ☎ (707) 285-9164

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Rosa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm