Serving the Santa Rosa area  ·  (707) 285-9164  ·  Open Mon-Sun 7am-7pm
📞 (707) 285-9164 Free Quote

Metal Roofing in Guerneville, CA (95446) · Local Professionals

Santa Rosa Metal Roofing · Fast response in Guerneville and the Santa Rosa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+177Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Guerneville is a river town, and the Russian River shapes everything here, from the low-slung cabins and Victorians along the banks to the steep, wooded lots up above town. When the river rises, as it does most winters, roofs take a beating from wind-driven rain, fallen limbs, and debris.

Homeowners in 95446 call Santa Rosa Metal Roofing because we know the difference between a roof that just looks tough and one that actually holds up to river flooding, atmospheric-river storms, and the hot, dry summers that follow. We are based in Santa Rosa, just down the road, and we have worked on enough Guerneville properties to know the local terrain, the older housing stock, and the specific ways roofs fail here.

Metal Roofing in Guerneville (95446)

Guerneville sits in the Russian River Valley, surrounded by redwoods and hills, and the building stock reflects that. You have riverfront cabins on stilts, older Victorians and farmhouses on the flats, and hillside homes tucked into the trees. Many of these roofs were never designed for the combination of heavy winter rain and long dry spells, and that shows up as failed fasteners, rusted panels, and flashing gaps. The terrain also matters: tight lots, steep driveways, and tall trees mean access can be tricky, and we plan for that before we start. Drainage is another local issue. On the flats, water can pool near foundations during high water, so we pay close attention to gutters and downspouts. Up in the hills, the grade and the tree canopy affect how debris collects and how we stage materials.

Our team has worked throughout Guerneville and the surrounding Sonoma County area, from the streets near Johnson's Beach to the hills above town. We understand the local climate and the specific demands it places on a metal roof.

Our services in Guerneville

How a Job Works in Guerneville

Step 1: You call us at (707) 285-9164 or request a free estimate online. We schedule an on-site assessment, and we come out to look at your roof, your attic, and the surrounding conditions. We check for active leaks, failed fasteners, and any storm damage, and we give you a written estimate with options.

Step 2: Once you approve, we handle the work. In Guerneville, that often means planning around tight access, coordinating with any HOA or historic review if your property is subject to it, and pulling the right permits. We verify current requirements with the local building department, and you can check basic county information through the City of Guerneville website. We keep you informed on scheduling and any weather delays.

Step 3: When the job is done, we clean up thoroughly. We haul away old materials, sweep the site, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next rainy season.

Pricing for metal roofing in Guerneville depends on the size and pitch of your roof, access, the condition of the existing roof, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are going over existing shingles, retrofit starts at $7 per square foot. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. We also offer coating and painting from $2.50 per square foot, and gutters from $9 per linear foot. For an accurate number, call us at (707) 285-9164 for a free estimate. We will walk you through the options and give you a clear, written price.

✅ Metal Roofing Alliance Member, licensed and insured for work in Guerneville and nearby areas.

My cabin is right on the Russian River and floods most winters. What kind of metal roof works best for that?
For riverfront properties, we often recommend standing seam or corrugated panels with a high-quality finish and careful attention to fasteners and flashing. The goal is to minimize places where water can get behind the panels and to use materials that resist corrosion in a damp environment. We also look at how debris and high water might affect the roof and gutters.
A storm just knocked a limb onto my roof and I have a leak. How fast can you get out to Guerneville?
We prioritize storm and wind damage repairs, especially active leaks. Call us at (707) 285-9164, and we will schedule the soonest available inspection, often within a day or two depending on demand. We can do temporary repairs if needed and then give you a full estimate for permanent fixes.
What does a typical metal roof replacement cost in Guerneville?
Most full replacements fall in the range of $9 to $12 per square foot installed, depending on the material and complexity. A simple ranch home with good access might be on the lower end, while a steep, wooded lot with multiple roof planes will be higher. We provide a free estimate so you know exactly what your project will cost.
Do I need a permit to replace my roof in Guerneville, and how do I find out?
Yes, roofing permits are commonly required for replacements and re-roofs, and the rules vary by jurisdiction. We always verify the current requirements with the local building department before starting work. You can also check general county information through the City of Guerneville website. We handle the permitting process for you.
My neighbor's tree hangs over my roof. What are my rights, and do I need HOA approval for a new roof color?
Property line and tree issues are civil matters, and we recommend talking with your neighbor first. For HOA approval, many neighborhoods in Guerneville have design review, so check with your HOA before choosing a panel profile or color. We can provide product samples and documentation to help with the approval process.
Are you insured for work on my Guerneville property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide certificates of insurance upon request so you have peace of mind.
What should I do to maintain my metal roof in Guerneville between rainy seasons?
We recommend an annual inspection in late summer or early fall, before the rains start. Clear debris from the roof and gutters, check for loose fasteners, and look for any signs of rust or flashing damage. If you are not comfortable on the roof, call us for a professional inspection. Catching small issues early prevents bigger problems when the storms hit.
Why choose us?

Trusted professionals in Santa Rosa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Rosa

All your work handled by qualified professionals in Santa Rosa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

177+ Verified Client Reviews in Santa Rosa

⭐⭐⭐⭐⭐ 4.9/5 · 177 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Rosa · Response within 24h · No commitment · ☎ (707) 285-9164

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Rosa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm