Serving the Santa Rosa area  ·  (707) 285-9164  ·  Open Mon-Sun 7am-7pm
📞 (707) 285-9164 Free Quote

Metal Roofing in Novato, CA (94945) · Local Professionals

Santa Rosa Metal Roofing · Fast response in Novato and the Santa Rosa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+177Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Novato sits at the southern gateway to Sonoma County, where the 101 freeway meets the rolling hills below Mount Burdell. The housing stock here is a mix of 1950s and 1960s ranch homes in neighborhoods like Hamilton and Ignacio, and newer hillside builds in the Marin Valley area, many with low-pitch roofs that take a beating from sun and winter rain. With earthquake country underfoot, a lighter metal roof makes structural sense for these homes.

Homeowners in Novato (94945) call Santa Rosa Metal Roofing because we understand the local climate: hot, dry summers, fall fire weather, and winter atmospheric-river storms that can send water under failed flashing. Whether you're near the downtown shops on Grant Avenue or out by the Indian Valley Golf Club, our team brings metal roofing expertise right to your door.

Metal Roofing in Novato (94945)

Novato's terrain varies from flat valley floors near the Petaluma River to steep hillsides in the Ignacio and Marin Valley neighborhoods. That means we see everything from simple gable roofs on mid-century ranches to complex multi-plane roofs on hillside homes with tight lot access. The soil here is often clay-heavy, which can affect drainage around the foundation, so we pay close attention to gutter and downspout placement. Many homes have mature oak trees that drop limbs and debris, leading to punctures and clogged valleys. We also deal with wind-driven rain that finds its way into seams and fastener holes, especially on older roofs that have already been patched a few times.

Our team has been serving Novato and the surrounding Santa Rosa area for years, and we know the local building department's requirements. We're fully insured with general liability and workers' compensation, and we're a Metal Roofing Alliance member, so you can trust that the work is done to industry standards.

Our services in Novato

How a Job Works in Novato

Step 1: You call us at (707) 285-9164 or request a free estimate online. We schedule an on-site assessment at your Novato property, where we inspect the existing roof, check for leaks, and discuss your options. We'll provide a written estimate with clear pricing and no surprises.

Step 2: Once you approve, we handle the permitting through the City of Novato and coordinate with any HOA if applicable. On the work day, our crew arrives with materials and equipment, and we protect your landscaping and driveway. For hillside homes with tight access, we plan ahead for material delivery and staging. We install your new metal roof according to manufacturer specifications, whether it's standing seam, corrugated panels, or stone-coated steel.

Step 3: After installation, we clean up thoroughly, removing all debris and using a magnet to sweep for nails. We walk you through the finished roof, explain maintenance, and make sure you're completely satisfied before we leave. Your property is left clean and your new roof is ready to protect your home for decades.

Pricing for metal roofing in Novato depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a more accurate number, call us at (707) 285-9164 for a free estimate. We'll assess your roof and give you a straightforward quote.

✅ Metal Roofing Alliance Member, licensed and insured for work in Novato and nearby areas.

My home in the Hamilton neighborhood has a low-pitch roof. Can metal roofing work on it?
Yes, metal roofing is actually a great choice for low-pitch roofs. We use standing seam or corrugated panels with proper underlayment to ensure watertight performance. The key is correct installation and flashing details, which we specialize in. We'll evaluate your roof pitch during the free estimate and recommend the best system.
A storm just blew some panels loose on my roof in Novato. How quickly can you respond?
We offer storm and wind damage repair with free inspections. Call us at (707) 285-9164, and we'll schedule a prompt visit to secure your roof and prevent further damage. Our team is experienced in emergency repairs and can often provide temporary fixes before completing permanent repairs.
What's the typical cost for a metal roof replacement on a 1,500-square-foot ranch home in Novato?
For a 1,500-square-foot ranch, a basic metal roof replacement might range from $13,500 to $18,000, depending on material and roof complexity. Standing seam would be at the higher end. We provide free estimates so you can get an exact price for your home.
Do I need a permit for a metal roof replacement in Novato, and how do I get one?
Yes, roofing permits are generally required for replacements in Novato. The City of Novato website has information on permits and inspections. We handle the permitting process for you, ensuring all work meets local codes and passes inspection.
My HOA requires approval for roof color changes. Can you help with that?
Absolutely. We can provide material samples and documentation to submit to your HOA for approval. We're familiar with HOA requirements in Novato and can coordinate to ensure your new roof meets community standards.
Are you fully insured for roofing work in Novato?
Yes, we carry general liability and workers' compensation insurance. We're happy to provide certificates of insurance upon request so you have peace of mind.
How often should I inspect my metal roof in Novato's climate?
We recommend an annual inspection, especially after winter storms and before fire season. Check for loose fasteners, debris in valleys, and signs of wear. Our team offers free estimates for inspections and can perform maintenance to extend your roof's life.
Why choose us?

Trusted professionals in Santa Rosa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Rosa

All your work handled by qualified professionals in Santa Rosa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

177+ Verified Client Reviews in Santa Rosa

⭐⭐⭐⭐⭐ 4.9/5 · 177 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Rosa · Response within 24h · No commitment · ☎ (707) 285-9164

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Rosa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm