Serving the Santa Rosa area  ·  (707) 285-9164  ·  Open Mon-Sun 7am-7pm
📞 (707) 285-9164 Free Quote

Metal Roofing in Cloverdale, CA (95425) · Local Professionals

Santa Rosa Metal Roofing · Fast response in Cloverdale and the Santa Rosa area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+177Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Cloverdale sits at the northern gateway of Sonoma County, where the vineyards of the Alexander Valley meet the oak-studded hills, and homes here face a fire season that has reshaped how we think about roofing. From the historic downtown blocks near the Citrus Fair to the hillside properties off Cloverdale Boulevard, metal roofs are going up because they stand up to embers, wind, and rain.

Homeowners in 95425 call Santa Rosa Metal Roofing because we understand fire country. We have seen how embers find every gap, and we install Class A metal roofs that give your home a fighting chance. Whether you are rebuilding after a close call or upgrading a ranch home off Dutcher Creek Road, our team brings local knowledge to every job.

Metal Roofing in Cloverdale (95425)

Cloverdale's terrain is a mix of flat valley floor and steep hillsides, and that shapes every roofing job. In town, lots are tight and many homes date back to the early 1900s, so access can be tricky and roof pitches vary. Out on the ridges, properties often sit on grade with sweeping views but also with exposure to Diablo winds that can lift panels and drive embers. We account for slope, drainage, and wind uplift on every estimate, and we know how winter atmospheric rivers can send water sheeting off a roof if the flashing and gutters are not sized right.

Our team has worked across Sonoma County, from the rebuilds in Coffey Park to the farmhouses and barns of the Russian River Valley. In Cloverdale, we have helped homeowners choose stone-coated steel and standing seam for fire resistance, and we have repaired wind-damaged panels on hillside homes after storm events. We are a Metal Roofing Alliance member and fully insured, so you can trust the crew on your property.

Our services in Cloverdale

How a Job Works in Cloverdale

Step 1: Call us at (707) 285-9164 or request a free estimate online. We will schedule an on-site assessment at your Cloverdale property, inspect your existing roof, discuss your goals, and take measurements. You will get a written estimate with clear pricing and options.

Step 2: Once you approve, we handle the permitting with the local building department and coordinate any HOA or historic review if needed. On the scheduled day, our crew arrives with materials and begins the installation or repair. We protect your landscaping and keep the site organized, especially on tight lots near downtown Cloverdale.

Step 3: After the work is done, we do a full cleanup, haul away debris, and walk the roof with you to make sure you are satisfied. We leave your property clean and your roof ready for the next fire season.

Metal roofing in Cloverdale is priced by the square foot, and the final cost depends on the material, roof complexity, access, and condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a precise estimate on your Cloverdale home, call us at (707) 285-9164. We will give you a free, no-obligation quote.

✅ Metal Roofing Alliance Member, licensed and insured for work in Cloverdale and nearby areas.

My Cloverdale home is on a steep hillside off Cloverdale Boulevard. Can you handle the access and wind uplift requirements?
Yes, we regularly work on hillside properties in Cloverdale. We assess the grade and access during our free estimate, and we use proper fastening and wind uplift ratings for exposed sites. Our crews are equipped to work safely on steep slopes, and we can recommend panel profiles that perform well in high-wind areas.
A storm just lifted some panels on my roof in Cloverdale. How quickly can you respond?
We offer free inspections for storm and wind damage in Cloverdale. Call us at (707) 285-9164, and we will schedule a visit as soon as possible, often within a day or two depending on demand. We can tarp or secure the area to prevent further damage and provide a repair estimate.
What does a typical metal roof repair cost in Cloverdale?
Most repairs start at $450, but the final cost depends on the extent of damage, roof pitch, and material. Leak repairs, flashing fixes, and screw replacement are common jobs we handle. We give you a clear estimate before any work begins.
Do I need a permit for a metal roof replacement in Cloverdale?
Yes, roofing permits are commonly required for a full replacement or re-roof in Cloverdale. Requirements vary, so it is best to check with the City of Cloverdale website or the local building department. We handle the permitting process for you and ensure the work meets current codes.
My HOA has design rules for roofing. Can you help with approval?
We can provide product specifications, color samples, and installation details to submit to your HOA. If your home is in a historic district, we can suggest panel profiles that meet design guidelines. We coordinate with you and your HOA to make sure the roof meets all requirements.
Are you fully insured for roofing work in Cloverdale?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide certificates of insurance upon request. Your property and our crew are protected.
What maintenance does a metal roof need in Cloverdale's fire country?
We recommend annual inspections, especially before fire season. Check for loose fasteners, debris accumulation in valleys, and any gaps that could let embers in. We offer inspection and maintenance services to keep your roof in top shape.
Why choose us?

Trusted professionals in Santa Rosa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Santa Rosa

All your work handled by qualified professionals in Santa Rosa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

177+ Verified Client Reviews in Santa Rosa

⭐⭐⭐⭐⭐ 4.9/5 · 177 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Santa Rosa · Response within 24h · No commitment · ☎ (707) 285-9164

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Santa Rosa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm